Implementation of energy value stream mapping (EVSM) as an alternative tool for the management and reduction of energy in processes in the industrial sector: a literature review

Carolina Perim Pereira, João Carlos Espíndola Ferreira, Lucila Maria de Souza Campos

Abstract


The increase in the price of energy due to the scarcity of energy resources has imposed enormous pressure on the industries to reduce the consumption of these resources and is forcing them to invest in techniques that contribute to the improvement of their energy efficiency. The application of methods such as Energy Value Stream Mapping (EVSM) has been promising in reducing energy consumption and is being one of the methods widely used by industry professionals to eliminate inefficiencies in processes. Based on this information, the objective of this work is to present an analysis of the literature on EVSM addressing the modes of implementation, advantages and disadvantages, the applied industrial context and the complementary methods. By means of the results it was verified that its use allows the reduction of energy consumption, but is limited to a static representation and allows the analysis of only one product. In addition, the implementation of EVSM is performed through procedures, methodologies and simulation tools, and the most used method is the Sankey diagram and the electronics sector was the one in which EVSM is most implemented. Finally, suggestions are made for methods to complement its use and to assist future research in this area.

Keywords


Lean Manufacturing; Value Stream Mapping; Energy Efficiency ; Energy Consumption; Literature Review

References


Aadithya, G. (2016). Application of energy value stream mapping as auditing tool for non-value added industrial energy management. Ieee, 62–66.

Bogdanski, G., Schönemann, M., Thiede, S., Andrew, S., & Herrmann, C. (2013). An extended energy value stream approach applied on the electronics industry. IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012, 397(1), 65–72. http://doi.org/10.1007/978-3-642-40352-1_9

Bush, A., Palasciano, C., Portioli Staudacher, A., Taisch, M., & Vitali, S. (2014). Investigating lean methodology for energy efficient manufacturing. IFIP Advances in Information and Communication Technology, 439 (2), 508–517. http://doi.org/10.1007/978-3-662-44736-9_62

Davies, E., & Merwe, K. (2014). Development of a framework for a lean based water and energy efficiency tool, South African Journal of Industrial Engineering 5(2), 95–104.

Davies, E., & Merwe, K. (2016). Methodology to produce a water and energy stream map (WESM) in the South African manufacturing industry. South African Journal of Industrial Engineering, 27(3), 219–229. http://doi.org/10.7166/27-3-1657

Drechsel, M., Bornschlegl, M., Spreng, S., Bregulla, M., & Franke, J. (2013). A new approach to integrate value stream analysis into a continuous energy efficiency improvement process. IECON Proceedings (Industrial Electronics Conference). http://doi.org/10.1109/IECON.2013.6700382

Environmental Protection Agency US (2007). The lean and environment toolkit. Prevention, 96. Disponível em: http://www.epa.gov/lean. Acesso em: 18 de junho de 2017.

Erlach, K. (2011). Increasing energy efficiency using energy value stream mapping. National Energy Efficiency Conference, 1–30.

Faulkner, W., & Badurdeen, F. (2014). Sustainable value stream mapping (Sus-VSM): methodology to visualize and assess manufacturing sustainability performance. Journal of Cleaner Production, 85, 8–18. http://doi.org/10.1016/j.jclepro.2014.05.042

Ferenhof, H.A., Vignochi, L., Selig, P.M., Lezana, G.R., & Campos, L.M.S. (2014) Environmental management systems in small and medium-sized enterprises: An analysis and systematic review. Journal of Cleaner Production, 74, 44-53. http://doi.org/10.1016/j.jclepro.2014.03.027

Ghadimi, P., Li, W., Kara, S., & Herrmann, C. (2014). Integrated material and energy flow analysis towards energy efficient manufacturing. Procedia CIRP, 15, 117–122. http://doi.org/10.1016/j.procir.2014.06.010

Keskin, C., Asan, U., & Kayakutlu, G. (2013). Value stream maps for industrial energy efficiency. ResearchGate, 129, 1–29. http://doi.org/10.1007/978-1-4471-5143-2

Li, W., Thiede, S., Kara, S., & Herrmann, C. (2017). A Generic sankey tool for evaluating energy value stream in manufacturing systems. Procedia CIRP, 61, 475–480. http://doi.org/10.1016/j.procir.2016.11.174

Melsas, R., Rosin, A., & Drovtar, I. (2016). Value stream mapping for evaluation of load scheduling possibilities in a district heating plant. EEEIC 2016 – International Conference on Environment and Electrical Engineering. http://doi.org/10.1109/EEEIC.2016.7555696

Melvin, A., & Baglee, D. (2008). Value stream mapping: A dairy industry prospective. 2008 IEEE International Engineering Management Conference, 1–5. http://doi.org/10.1109/IEMCE.2008.4618003

Müller, E., Stock, T., & Schillig, R. (2014). A method to generate energy value-streams in production and logistics in respect of time- and energy-consumption. Production Engineering, 8(1–2), 243–251. http://doi.org/10.1007/s11740-013-0516-9

Posselt, G., Fischer, J., Heinemann, T., Thiede, S., Alvandi, S., Weinert, N., & Herrmann, C. (2014). Extending energy value stream models by the TBS dimension - applied on a multi product process chain in the railway industry. Procedia CIRP, 15, 80–85. http://doi.org/10.1016/j.procir.2014.06.067

Rother, M., & Shook, J. (2003). Learning to See - value stream mapping to create value and eliminate muda. Lean Interprises Institute (Vol 1.3, Chap 1, pp4).

Salonitis, K., Zeng, B., Mehrabi, H. A., & Jolly, M. (2016). The challenges for energy efficient casting processes. Procedia CIRP, 40, 24–29. http://doi.org/10.1016/j.procir.2016.01.043

Schmidt, M., Raible, C., Keil, R., & Gräber, M. (2007). Energy and material stream mapping. Recovery of Materials and Energy for Resource Efficiency. Davos, 7, 3–5. Disponível em: http://umwelt.hs- pforzheim.de/fileadmin/dokumente/2007/English/Schmidtetal_MSM_2007_R07.pdf. Acesso em: 18 de junho de 2017.

Schnellbach, P., & Reinhart, G. (2015). Evaluating the effects of energy productivity measures on lean production key performance indicators. Procedia CIRP, 26, 492–497. http://doi.org/10.1016/j.procir.2014.07.094

Schönemann, M., Kurle, D., Herrmann, C., & Thiede, S. (2016). Multi-product EVSM simulation. Procedia CIRP, 41, 334–339. http://doi.org/10.1016/j.procir.2015.10.012

Schönemann, M., Thiede, S., & Herrmann, C. (2014). Integrating product characteristics into extended value stream modeling. Procedia CIRP, 17, 368–373. http://doi.org/10.1016/j.procir.2014.01.091

Srivastava, S. K. (2007). Green supply-chain management: a state-of-the-art literature review. International Journal of Management Reviews, 9(1), 53–80. http://doi.org/10.1111/j.1468-2370.2007.00202.x

Thiede, S., Li, W., Kara, S., & Herrmann, C. (2016). Integrated analysis of energy, material and time flows in manufacturing systems. Procedia CIRP, 48, 200–205. http://doi.org/10.1016/j.procir.2016.03.248

Thumann, A., & Younger, W. (2008). Energy auditing basics. Handbook of Energy Audits. The Fairmont Press (Ed.) (Vol. 7, Chap 1, pp 1-2).

Verma, N., & Sharma, V. (2016). Energy value stream mapping a tool to develop green manufacturing. Procedia Engineering, 149(June), 526–534. http://doi.org/10.1016/j.proeng.2016.06.701


Refbacks

  • There are currently no refbacks.


_________________________________________________________

Licença Creative Commons
This journal is licenced under a Creative Commons LicenseCreative Commons - Atribuição-CompartilhaIgual 4.0 Internacional.

Contact: lean@contato.ufsc.br
Tel: +554837217062

EPS - Departamento de Engenharia de Produção e Sistemas

CTC - Centro Tecnológico

UFSC - Universidade Federal de Santa Catarina

Caixa Postal 476 - Campus Universitário - Trindade